Floriani No Show Nylon Mesh Fusible

Floriani No Show Nylon Mesh Fusible

Floriani No Show Nylon Mesh Fusible Stabilizer

Floriani No Show Nylon Mesh Fusible is a 1.5 oz sheer cutaway available in black, white and beige. Unlike traditional cutaway, this product will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments. The uniqueness of the fusible version makes this product a staple in your embroidery stabilizers. There is no need for basting or messy spray adhesives which leave a residue on the needle and machine when using this product. By fusing the stabilizer to the back of the garment, we are more successful in hooping and do not stretch the garment out of shape. The stabilizer is temporarily attached to the entire area where the embroidery will be stitched unlike spray adhesives which only "spot" tack and allow shifting of the fabric. This product is also available in a non-fusible version.

Floriani No Show Nylon Mesh Fusible Stabilizer

  • Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4" x 4").
  • Use the fusible version to cover up scratchy stitches on the back of the embroidery.
  • Will not shadow through on light weight cottons and knits.

To use Floriani No show Nylon Mesh Fusible:

  1. Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
  2. Fuse the entire piece of the stabilizer on to the back of the garment using a low to medium temp, dry iron. (260°F, silk setting) When pressing the stabilizer on to the garment, the iron surface should touch the fabric, not the stabilizer.
  3. Hoop the garment and place the embroidery frame on to the machine. Complete the layout and centering of the design.
  4. Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
  5. After the design is complete, remove the garment from the machine and embroidery hoop. To remove the No Show Mesh Fusible, re-heat the stabilizer and peel it back gently to the design and trim.
  6. *Tip! If embroidering knit, don't forget to use topping!
  7. *Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the fusible mesh, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness.

Customer Reviews

Review by  Chris
(posted on 08/13,2014 14:04:00)
the best and no waste for the small embroidery hoop, just cut 8 inch strips and then in half! I love it!!!
Review by  Beth
(posted on Dec 09, 2013)
I love the Floriani products, I've used the No Show Mesh now on several children's shirts. All have come out beautifully. The only complaint I have is that when I used it on a fleece sweatshirt, it was difficult to remove the stabilizer from the shirt after it was embroidered. Not to say it couldn't be operator error, I am new to embroidery. Perhaps another stabilizer would have been a better choice. Perhaps a non-fusible. Love your products!!!


A Note from Kayly: Thank you for your comments! I agree - Wet N Gone Tacky is perfect for embroidery on hard to hoop items such as napkins, collars, cuffs, etc. However, it is not designed to be embroidered directly on to free standing lace. Please use our regular Wet N Gone for this technique and make sure the lace is digitized for "free standing". The adhesive on Wet N Gone Tacky is more difficult to remove if your water is hard. The answer is to use a water softener in the water such as hair conditioner, fabric softener or my favorite, bath water gel beads! This will force the adhesive to "let go" of the fibers of the fabric and they will wash away. Remember to use room temperature water for the best results.
Review by  Aunt Bee
(posted on Mar 29, 2012)
I love this product too. I have used white cutaway stabilizers on tee shirts and you can see the outline of the stabilitzer and it appears stiffer than the rest of the shirt. This does not show through and is soft while still holding the shirt for the embroidery process.
Review by  Connie Yang
(posted on Dec 06, 2010)
This product is amazing and I love it. I have never found a design that doesn't work great with this. It is soft holds the stitches and the fusibility is great for holding the garment still in the hoop. I would recommend to everyone.
Review by  Beverly Brown
(posted on Oct 29, 2010)
I was new to embroidery and someone said try Floriani. Well I did and now I try not to run out of any of the Floriani products. Other embroiderers think I am to particular. I really want to tell them to look at their end product versus mine. I will continue to use the product and do not intend to change. If I want to sell a bullet proof vest then I will use the same thing they do.
Review by 
(posted on )
Displaying 1 to 12 (of 5 customer reviews)

Add Review

Please do not use this form to ask questions or for customer service requests. The review system does not provide us an avenue to contact you. For support please click here to contact us. This form is for reviews only.

You are reviewing: Floriani No Show Nylon Mesh Fusible
Rate this product*: